How Do You Remove Pellets from A Traeger Auger

If you’re an avid griller, you’re probably familiar with the Traeger grill and its unique design that uses wood pellets as fuel. While this method provides excellent flavor, it’s not uncommon to run into issues with the pellets getting stuck in the auger. This can cause your grill to malfunction and prevent it from operating properly. So, how do you remove pellets from a Traeger auger? In this blog post, we’ll provide some helpful tips and tricks to effectively clear any blockages in your Traeger grill so you can continue cooking up delicious BBQ without any interruptions.

1. Turn off the grill and remove the hopper lid.

To begin the process of removing pellets from a Traeger auger, the first step is to turn off the grill and remove the hopper lid. This ensures that the grill is not hot and that no pellets are being fed into the auger as you work. It is important to take safety precautions before removing the hopper lid. Always make sure to wear protective gear to protect yourself from hot surfaces or flying debris. By removing the hopper lid, you gain access to the auger motor and can detach it with pliers and an Allen key. By sliding the drill’s chuck onto the end of the auger shaft, you can remove any remaining pellets and reposition the auger. This step is crucial in maintaining the functionality of your Traeger Wood Pellet Grill. Lastly, always wait for the grill to cool down before closing the lid, and remove the pellets from the hopper if you won’t be using the grill for a while.

2. Use pliers and an Allen key to detach the auger motor.

Now that the Traeger Wood Pellet Grill’s hopper is empty and the auger shaft is visible, it’s time to detach the auger motor. This can be accomplished with the use of pliers and an Allen key. The shear pin must first be removed using the Allen key, and then the screw connecting the Auger Drive Motor shaft to the Auger shaft should be unscrewed. With these steps complete, the auger shaft will now be disconnected from the motor. This is an essential step in the process of removing pellets from the auger to ensure that the grill can function correctly moving forward. Always remember to follow safety precautions and wear protective gear when handling the auger and pellets.

3. Slide the drills chuck onto the end of the auger shaft to remove any remaining pellets.

After detaching the auger motor, the next step in removing pellets from a Traeger auger is to slide the drills chuck onto the end of the auger shaft. This will allow you to easily remove any remaining pellets or sawdust from the tube. It’s important to tighten the chuck properly to ensure it stays in place while removing the pellets. Once the chuck is in place, use a wet-dry vacuum or your hands to remove any remaining pellets or sawdust from the hopper and the auger tube. Don’t forget to place a bucket beneath the bottom hopper door to catch any pellets that fall out. After you’ve removed all the pellets, reposition the auger and reprime it before closing the lid and turning off the temperature dial. Always remember to follow safety precautions and wear protective gear when handling the auger and pellets.

4. Open the bottom hopper door and place a bucket beneath it to catch the remaining pellets.

Next up in the process of removing pellets from a Traeger auger is opening the bottom hopper door and placing a bucket beneath it to catch the remaining pellets. This is an essential step, as it ensures that no pellets are wasted and you can reuse them for your next grilling adventure. Once you have the bucket in place, you can simply unlock and open the bottom hopper door and allow the Auger Tube to be “charged” with pellets. It’s always a good idea to keep a bucket handy for instances like this, as it makes cleaning up a breeze. Remember to keep safety precautions in mind at all times and wear protective gear when handling the auger and pellets. With this step done, you’re one step closer to maintaining your Traeger Wood Pellet Grill in top condition!

5. Reach into the hopper with a cup or dish to remove pellets until the auger is visible.

After turning off the grill and detaching the auger motor, reach into the hopper with a cup or dish to remove any remaining pellets. Slowly empty the hopper until the auger is visible. It is important to be patient and thorough while removing the pellets, as any remaining pellets can cause issues down the line. Once the hopper is empty, use pliers and an Allen key to reposition the auger and reprime it. Remember to always follow safety precautions, wear protective gear, and wait for the grill to cool down before attempting to remove the pellets. By taking these steps, grill owners can ensure their auger is clean and functioning properly.

6. Use the

Once the auger is visible, it’s time to remove any remaining pellets. To do this, use the “Prime Auger” function. This will run the auger for a full length and stop. Then, using pliers and an Allen key, detach the auger motor. Slide the drills chuck onto the end of the auger shaft to remove any remaining pellets. Open the bottom hopper door and place a bucket beneath it to catch any remaining pellets. Reach into the hopper with a cup or dish to remove pellets until the auger is completely visible. Once all pellets are removed, reposition the auger and reprime it. Make sure to always follow safety precautions and wear protective gear when handling the auger and pellets.

7. Reposition the auger and reprime it.

After successfully removing the pellets from the Traeger auger, the next step is to reposition and reprime it. This ensures that the motor is working smoothly and the wood pellets can be fed into the grill without any issues. First, carefully move the auger back into place and secure it in position. Then, insert the drill’s chuck onto the end of the auger shaft and run it for a few seconds. This helps to break up any remaining wood pellets that might be clogging the auger. After that, it’s time to reprime the auger by using the “Prime Auger” function on the grill’s menu. This will run the auger for a full length, stopping once it has been completed. Then, simply reposition the auger and start it again. With these steps, the Traeger grill auger will be ready to use for your next BBQ session.

8. Wait for the grill to cool down, then close the lid and turn the temperature dial to OFF.

After finishing cooking and removing the pellets from the Traeger auger, it’s important to let the grill cool down before closing the lid and turning the temperature dial to OFF. This step ensures that any residual heat or flames are completely extinguished and prevents any potential accidents or fires. Once the grill has cooled down, make sure to close the lid securely and turn the temperature dial to OFF. It is also recommended to remove any leftover pellets from the hopper if the grill won’t be used for a while. Always remember to follow safety precautions and wear protective gear when handling the Traeger auger and pellets. By following these simple steps, you can ensure a safe and enjoyable grilling experience.

9. Remove the pellets from the hopper if you won’t be using the grill for a while.

It is a great idea to remove the pellets from the hopper if you won’t be using the Traeger grill for a while. This will help prevent any potential issues that could arise from moisture build-up. Moisture can cause the pellets to swell, blocking the auger and causing damage to the grill. Removing the pellets is a simple process that involves opening the bottom hopper door and placing a container underneath it to catch any remaining pellets. Using a cup or dish, gently remove the pellets until the auger is visible, taking care not to damage the grill’s internal components. Once removed, store the pellets in an airtight container to keep them dry and ready for your next Traeger grilling session. By taking these simple precautions, you can ensure your Traeger grill stays in top condition and produces delicious wood-fired flavor every time.

10. Always make sure to follow safety precautions and wear protective gear when handling the auger and pellets

It’s important to always take safety precautions when handling the auger and pellets on your Traeger grill. Before attempting to remove pellets from the auger, make sure to turn off the grill and remove the hopper lid. Wear protective gloves and eyewear to avoid any potential injuries. Use pliers and an Allen key to detach the auger motor, and slide the drills chuck onto the end of the auger shaft to remove any remaining pellets. Open the bottom hopper door and place a bucket beneath it to catch the remaining pellets. Reach into the hopper with a cup or dish to remove pellets until the auger is visible. Once you’ve completed the necessary steps, reposition the auger and reprime it.

Always wait for the grill to cool down, then close the lid and turn the temperature dial to OFF. It’s important to remove the pellets from the hopper if you won’t be using the grill for a while. Stay safe and handle the auger and pellets with care.