Recliner Won’t Close? Troubleshooting Tips And Solutions

Are you frustrated with your recliner not closing? It can be a real hassle to deal with a malfunctioning recliner, especially when you just want to relax and put your feet up. Luckily, there are some troubleshooting tips and solutions that can help you fix the issue and get your recliner functioning properly again.

In this article, we will guide you through the steps to troubleshoot your recliner and provide solutions to common problems. From checking the position of the footrest to adjusting the tension and lubricating the moving parts, we will cover everything you need to know to fix your recliner.

By following these tips, you can save yourself time and money by avoiding a costly service call and prevent future issues from occurring.

Check the Position of the Footrest

Okay, before you get too frustrated, let’s take a look at the position of the footrest – sometimes it can sneak up on us and cause our beloved recliners to refuse to close.

First things first, make sure that the footrest is completely down. If it’s slightly raised, even just a little bit, the recliner won’t close.

If the footrest is down and the recliner still won’t close, try pushing the footrest down even further. Sometimes it can get stuck in a halfway position and needs a little extra push to get it all the way down.

If this doesn’t work, check to see if anything is blocking the footrest from going all the way down.

Lastly, if the footrest is down and nothing is blocking it, try pulling the recliner handle again. This time, push the footrest down with your foot while pulling the handle – this added pressure can sometimes do the trick and get the recliner to close.

Don’t give up just yet – sometimes it takes a little bit of troubleshooting to get our recliners back to working properly.

Inspect the Reclining Mechanism

When inspecting the reclining mechanism of your recliner, there are a few key points to keep in mind. First, look for any broken or loose springs that may be causing the issue.

Additionally, check for any obstructions or dirt buildup that could be interfering with the mechanism’s operation. Finally, test the handle or button to make sure it’s functioning properly.

By following these steps, you can identify and address any issues with your recliner’s reclining mechanism.

Look for Broken or Loose Springs

If you’re feeling frustrated with your recliner that won’t close, one possible reason could be broken or loose springs. The springs in a recliner are responsible for providing tension and support to the frame, and if they become damaged or detached, it can cause the recliner to malfunction.

To diagnose this issue, you’ll need to inspect the springs by removing the upholstery cover and examining the mechanism. Look for any signs of wear and tear, such as rust, fraying, or twisting, and check that the springs are securely attached to the frame.

If you do find broken or loose springs, you may be able to fix the issue yourself by replacing or reattaching them. However, this can be a complicated process, and it’s recommended that you seek the help of a professional if you’re not confident in your ability to do so.

In some cases, the damage may be too severe to repair, and you may need to replace the entire recliner. While this can be a costly solution, it’s important to prioritize your safety and comfort, and investing in a new recliner may be the best option in the long run.

Check for Obstructions or Dirt Buildup

Don’t let a simple issue like dirt buildup or obstructions ruin your relaxation time in your favorite chair. If your recliner won’t close, it could be due to dirt or debris that has accumulated in the mechanism. This is a common problem that can be easily fixed with a little bit of cleaning.

First, check the area around the recliner for any objects that may be obstructing the closing mechanism. Look for items such as toys, blankets, or other debris that may have fallen into the mechanism. Next, check the recliner’s footrest and make sure it’s completely lowered. If the footrest is not fully lowered, it can prevent the recliner from closing properly. If you still can’t find any obstructions, it’s time to move onto cleaning the mechanism. Use a soft-bristled brush to remove any dirt or debris that has accumulated in the mechanism. Once you’ve cleaned the mechanism, try closing the recliner again. If it still won’t close, it may be time to call a professional for help.

Problem	Solution
Obstructions in the mechanism	Check the area around the recliner for any objects that may be obstructing the closing mechanism.
Footrest not fully lowered	Make sure the footrest is completely lowered.
Dirt or debris buildup	Use a soft-bristled brush to remove any dirt or debris that has accumulated in the mechanism.
Mechanical issue	Call a professional for help if the recliner still won’t close after cleaning.
Loose screws or bolts	Tighten any loose screws or bolts that may be causing the problem.

By following these simple troubleshooting tips, you may be able to fix the issue on your own and avoid the cost of a professional repair. Remember to regularly clean and maintain your recliner to prevent future issues from occurring.

Test the Handle or Button

To ensure a smooth reclining experience, it’s important to test the handle or button. Sometimes, the issue with a recliner not closing lies in the handle or button not functioning correctly.

If you have a lever-style handle, make sure it’s moving freely and not stuck. If it’s stuck, try applying some lubricant to the mechanism and see if that helps. If the handle still won’t budge, you may need to replace it.

If you have an electric recliner, check to see if the button is working properly. Sometimes a button may be stuck or not making proper contact with the mechanism. Try pressing the button a few times to see if it’s stuck or if it needs to be replaced.

In some cases, the issue may be with the wiring or motor, so it’s important to have a professional take a look if the problem persists. By checking the handle or button, you can potentially fix the issue and get back to enjoying your recliner in no time.

Test the Power Supply

First, you should check the power supply to ensure that it’s functioning properly. Make sure that the recliner is plugged in and that the outlet is working. If the outlet isn’t working, try plugging the recliner into a different outlet.

If the recliner still won’t close, check the power cord for any damage or frayed wires. If you find any damage, you may need to replace the power cord.

If the power supply is functioning properly, then there may be an issue with the recliner’s motor or control panel. Check the motor and control panel for any signs of damage or wear and tear. If you notice any issues, you may need to have the recliner repaired or replaced. It’s also possible that the control panel or motor may need to be reset. Refer to the manufacturer’s instructions for resetting the control panel and motor.

If you’ve checked the power supply and the motor and control panel, and the recliner still won’t close, it’s best to seek professional help. A qualified technician can diagnose and repair any issues with the recliner. Attempting to repair the recliner yourself can be dangerous and may cause further damage.

Contact the manufacturer or a certified technician for assistance. With proper troubleshooting and repairs, you can enjoy the comfort of your recliner once again.

Adjust the Tension

You can easily adjust the tension of your recliner by following these simple steps. First, locate the tension adjustment knob or lever, which is usually located on the underside of the recliner. Once you have located it, turn the knob or move the lever in the direction that increases tension. Test the recliner to see if it is now able to close properly. If not, continue to adjust the tension until you find the right balance.

Adjusting the tension of your recliner can be a trial and error process. It may take a few tries to find the perfect balance between a recliner that is too loose and one that is too tight. To help you keep track of your adjustments, use the table below to record your progress. This will make it easier to go back and make changes if needed.

Adjustment	Result	Notes
Increase tension	Recliner still won’t close	Adjusted tension again
Decrease tension	Recliner closes too easily	Adjusted tension again
Increase tension slightly	Recliner closes smoothly	Found perfect tension balance

Adjusting the tension of your recliner can be a simple fix to a common problem. However, if you have tried adjusting the tension and your recliner still won’t close properly, it may be time to call in a professional. They can help diagnose the issue and provide a more in-depth repair solution. Remember to always follow safety precautions and refer to your recliner’s manual for specific instructions.

Lubricate the Moving Parts

When it comes to keeping your favorite seat in tip-top shape, it’s important to remember to lubricate the moving parts regularly. Lubrication helps to prevent friction, which can cause parts to wear out and eventually break.

Here are some tips for lubricating your recliner’s moving parts:

• Use a silicone-based lubricant: Silicone-based lubricants are ideal for recliners because they’re long-lasting and won’t attract dust or dirt. Avoid using oil-based lubricants, as they can cause the parts to become sticky and attract dirt and debris.

• Apply lubricant to all moving parts: Be sure to apply lubricant to all the moving parts on your recliner, including the joints, pivots, and hinges. This will help to ensure that everything moves smoothly and quietly.

• Wipe off excess lubricant: After applying lubricant, be sure to wipe off any excess with a clean cloth. This will prevent the lubricant from attracting dirt and debris.

• Lubricate regularly: It’s important to lubricate your recliner’s moving parts regularly, at least once every six months. This will help to prevent wear and tear and extend the life of your recliner.

• Consult the owner’s manual: If you’re not sure how to lubricate your recliner, consult the owner’s manual. It should have instructions on how to properly lubricate the moving parts.

By following these tips, you can keep your recliner running smoothly and avoid any frustrating issues with it not closing properly. Remember to lubricate regularly and consult the owner’s manual if you’re not sure how to properly maintain your recliner.

Consider Professional Repairs

If you’ve tried all the troubleshooting tips and your recliner still won’t close, it might be time to consider professional repairs.

The first step is to find a reputable repair service in your area, which you can do by asking for referrals or searching online.

Once you’ve found a few options, get a quote for the repair so you can make an informed decision on whether to proceed.

Find a Reputable Repair Service

To find a reputable repair service, it’s important to do some research and ask for recommendations from friends or family who have had similar issues with their recliners. You don’t want to trust just anyone with your recliner, so it’s best to find a company that has experience and a good reputation.

Here are some tips to help you find a reliable repair service:

• Look for online reviews and ratings from previous customers
• Check if the company has any certifications or affiliations with reputable organizations
• Ask about their warranty or guarantee on their services
• Compare prices and services offered by different repair companies before making a decision.

By following these tips, you can ensure that you find a repair service that will help you fix your recliner and get it back to working condition. Don’t be afraid to ask questions and do your own research to find the best option for you.

Get a Quote for the Repair

Before hiring a repair service, it’s crucial to get a quote for the repair to avoid any unexpected costs or surprise fees. Reach out to the repair service and provide them with as much information about the issue as possible. This will allow them to provide an accurate estimate of the cost of the repair.

Make sure to ask if there are any additional costs, such as a service fee or the cost of any necessary replacement parts. When you receive the quote, take the time to review it carefully. Ask any questions you may have about the cost or the repair process.

If the quote seems too high or you’re unsure about any of the details, don’t hesitate to get a second opinion. It’s important to find a repair service that is transparent about their pricing and can provide a clear explanation of the work that needs to be done.

By getting a quote before hiring a repair service, you can ensure that you’re making an informed decision and avoid any unexpected costs or fees.

Prevent Future Issues

One way to avoid future problems with your recliner is by keeping it clean and well-maintained. Here are some tips on how to do this:

• Vacuum your recliner regularly to remove any dust or debris that has accumulated on it. You can also use a soft-bristled brush to remove any stubborn dirt or pet hair.
• Use a leather conditioner on your leather recliner to keep it from drying out and cracking. If you have a fabric recliner, make sure to follow the manufacturer’s instructions for cleaning and care.
• Avoid placing your recliner in direct sunlight or near a heat source, as this can cause the material to fade or warp over time.

Another way to prevent future issues with your recliner is to use it properly. Here are some things to keep in mind:

• Don’t use your recliner as a step stool or ladder. It’s not designed to support your weight in this way, and doing so can damage the mechanism.
• Avoid rocking your recliner too vigorously, as this can also cause damage to the mechanism.
• Don’t overload the pockets on the sides of your recliner with heavy items, as this can put unnecessary strain on the frame and cause it to weaken over time.

By following these tips, you can help ensure that your recliner stays in good condition and functions properly for years to come. Remember to always read the manufacturer’s instructions for cleaning and care, and don’t hesitate to contact a professional if you notice any issues with your recliner.