Replacing The Heating Element In Your Masterbuilt Smoker: A Guide

Are you having trouble with the heating element in your Masterbuilt smoker? Is it not working properly or not heating up at all? Don’t worry, replacing the heating element is a common issue that can easily be fixed with a few simple steps.

In this guide, we will walk you through the process of replacing the heating element in your Masterbuilt smoker, so you can get back to smoking your favorite meats and vegetables in no time.

First, we’ll help you assess the problem and gather the necessary tools. Then, we’ll guide you through removing the old heating element and installing the new one. We’ll also provide tips for maintaining your Masterbuilt smoker and troubleshooting common issues.

So, whether you’re a seasoned smoker or a beginner, you can trust this guide to help you get your smoker working like new again. Let’s get started!

Assessing the Problem

Now, let’s take a closer look at what’s causing the issue and see if we can pinpoint the faulty heating element. First off, check to make sure that the smoker’s plugged in and that the outlet’s working properly.

If the outlet’s not working, try plugging the smoker into a different outlet to see if that solves the issue. Next, check the heating element itself. Is there any visible damage, such as burn marks or cracks? If so, that’s likely the culprit.

You can also use a multimeter to test the continuity of the element. If the multimeter shows that there’s no continuity, then the heating element needs to be replaced. If neither of these steps reveals a problem, it’s possible that the issue lies elsewhere in the smoker’s electrical system.

In this case, it’s best to consult with a professional or the manufacturer for further troubleshooting and repair options. Don’t attempt to fix an electrical issue that you’re not confident in handling on your own, as it can be dangerous and cause further damage to your smoker.

Gathering the Necessary Tools

Before you start, you’ll need to make sure you have all the tools necessary to complete the task of changing out the faulty component. The most important tool you’ll need is a replacement heating element that is compatible with your Masterbuilt smoker model. You can find this online or at your local hardware store.

Additionally, you’ll need a screwdriver, pliers, and a wire cutter. Next, you’ll need to gather some safety gear. Make sure you have a pair of gloves to protect your hands from any sharp edges or hot surfaces. You may also want to wear safety glasses to protect your eyes from any debris that could fly up during the process.

It’s always better to be safe than sorry, so don’t skip this step! Finally, before you start replacing the heating element, make sure you have a clear workspace. You’ll need plenty of room to maneuver around your smoker and access the component. It’s also a good idea to have a clean surface to work on, so you don’t accidentally misplace any screws or small parts.

With all your tools and safety gear ready, you’re now ready to tackle the task of replacing the heating element in your Masterbuilt smoker.

Removing the Old Heating Element

Now it’s time to remove the old heating element from your Masterbuilt smoker. To do this, you’ll need to disconnect the wires that connect it to the smoker’s control panel.

Next, you’ll remove the mounting bracket that holds the element in place. Finally, you can take out the old element itself.

It’s important to follow these steps carefully to ensure a safe and successful replacement process.

Disconnecting the Wires

First things first, you’ll want to unplug your smoker and make sure it’s cool enough to work on before disconnecting the wires. This is an important safety precaution that shouldn’t be overlooked.

Once you’ve ensured that your smoker is unplugged and cool, you can move on to disconnecting the wires. To disconnect the wires, you’ll need to locate the wire connectors that are attached to the heating element. These connectors will typically be located on the back of the smoker.

Once you’ve located the connectors, you can use your fingers or a pair of pliers to gently pull them apart. Make sure not to yank the wires too hard, as this may damage them.

Once the wires are disconnected, you can safely remove the old heating element and move on to the next step.

Removing the Mounting Bracket

To take off the mounting bracket, you’ll need a Phillips-head screwdriver and a little bit of patience. Here’s how to do it:

  1. Locate the mounting bracket at the back of the smoker. It’s the piece that holds the heating element in place.

  2. Use the Phillips-head screwdriver to remove the screws that are holding the mounting bracket to the smoker. There should be two screws on either side of the bracket.

  3. Once you’ve removed the screws, gently lift the mounting bracket away from the smoker. You may need to wiggle it a bit to get it to release.

  4. Set the mounting bracket aside in a safe place, as you’ll need to reattach it once you’ve installed the new heating element.

With the mounting bracket removed, you’re one step closer to replacing the heating element in your Masterbuilt smoker. Keep reading to learn how to remove the old element.

Removing the Old Element

You’re ready to say goodbye to the old, worn-out heating element and move on to the next step in restoring your beloved smoker to its former glory. Removing the old element is a crucial step in the process, and it’s important to do it carefully to avoid damaging any other parts of the smoker.

First, unplug the smoker and let it cool down completely. Then, locate the screws that hold the heating element in place. Depending on the model of your smoker, there may be one or two screws that need to be removed. Use a screwdriver to carefully unscrew them, being sure to keep track of where they go so you can easily reattach the new element later.

Once the screws are removed, gently pull the old element out of the smoker, being careful not to damage any wires or other components. Congratulations, you’ve successfully removed the old heating element!

Installing the New Heating Element

Now that you’ve removed the old heating element, it’s time to install the new one and get your Masterbuilt smoker up and running again!

First, locate the new heating element that you purchased and make sure it’s the correct one for your smoker.

Then, carefully slide the new element into the same place where the old one was removed. Make sure that the wires from the new heating element are securely connected to the same wires from the smoker. You may need to use wire nuts to connect the wires together.

Once the wires are connected, carefully tuck them back into the smoker’s housing. Lastly, reattach the mounting bracket or screws to secure the new heating element into place.

Double-check that everything is tightened and connected properly before turning on your smoker. Congrats, you’re all set with a new heating element in your Masterbuilt smoker!

Reassembling the Smoker

Once all the parts are in place, it’s time to reassemble your smoker and get it ready for your next delicious meal.

Start by carefully placing the heating element back into the smoker and securing it in place with the screws you removed earlier. Make sure the wires are properly connected and secured with the wire connectors.

Next, reattach the control panel by aligning it with the holes on the smoker and tightening the screws.

Then, carefully slide the wood chip tray and water pan back into their designated slots.

Finally, place the racks back into the smoker, making sure they are properly aligned and secured.

With everything back in place, plug in the smoker and turn it on to make sure the heating element is working properly.

Once you’ve confirmed that everything is in working order, you’re ready to start smoking your favorite meats and dishes. Enjoy the delicious flavors and aromas that your reassembled smoker will produce!

Tips for Maintaining Your Masterbuilt Smoker

To keep your smoker in great condition, it’s important to regularly clean the interior and exterior with a damp cloth and mild soap. After each use, remove any ashes and debris from the bottom of the smoker, and wipe down the grates and walls with a damp cloth. If you notice any buildup or grime that won’t come off with a simple wipe down, consider using a specialized smoker cleaner.

In addition to regular cleaning, it’s important to keep your smoker covered when not in use. This will protect it from the elements and prevent rust or other damage from occurring. If you don’t have a cover specifically designed for your smoker, consider using a heavy-duty tarp or other protective covering.

Lastly, to ensure your smoker is operating at its best, it’s important to check and maintain the various components regularly. This includes ensuring the heating element is functioning properly, checking the temperature gauge for accuracy, and replacing any worn or damaged parts as needed. By taking these steps, you can keep your Masterbuilt smoker in top condition and enjoy delicious smoked meats for years to come.

Emotion Action
Frustration Clean regularly and use a smoker cleaner
Protection Cover when not in use
Satisfaction with a long-term investment Check and maintain components regularly

Troubleshooting Common Issues

If you’re experiencing issues with your smoker, don’t worry – troubleshooting common problems is easier than you might think! One of the most common issues with a Masterbuilt smoker is a faulty heating element. This can cause your smoker to not heat up properly or not heat up at all.

To troubleshoot this issue, first make sure that your smoker is plugged in and that the power source is working. If the power source is working correctly, then it’s likely that your heating element needs to be replaced. You can order a replacement heating element from the manufacturer or from a local hardware store.

Replacing the heating element is a straightforward process that requires a few basic tools and some patience. First, unplug your smoker and remove the old heating element. Then, install the new heating element and connect all the wires back together.

Once everything is connected, test your smoker to make sure that it’s heating up correctly. With a little bit of troubleshooting and some DIY know-how, you can easily replace the heating element in your Masterbuilt smoker and get back to smoking delicious meats and veggies.


Congratulations! You’ve successfully replaced the heating element in your Masterbuilt smoker. By following the steps outlined in this guide, you were able to assess the problem, gather the necessary tools, remove the old heating element, install the new heating element, and reassemble the smoker.

Now that your smoker is up and running again, it’s important to keep it well-maintained to ensure its longevity. Regularly clean the smoker, check for any signs of wear and tear, and replace any parts as needed.

By taking good care of your Masterbuilt smoker, you can continue to enjoy delicious smoked meats and other dishes for years to come.

Happy smoking!