Pit Boss It Light Blinking: Troubleshooting And Solutions

If you own a Pit Boss grill, you know how important the IT (Internal Temperature) light is for ensuring a perfectly cooked meal. However, if you notice that the IT light is blinking, it can be a cause for concern. But don’t worry, troubleshooting and finding a solution is easier than you might think.

In this article, we will guide you through some common reasons why the Pit Boss IT light might be blinking and how to fix it. You’ll learn how to check the temperature sensor, inspect the wiring, clean the grill, update the firmware, and even how to prevent future issues.

So whether you’re a seasoned Pit Boss owner or just starting out, keep reading to learn how to keep your grill working like a charm.

Key Takeaways

• The Pit Boss IT light is an important tool for monitoring the temperature of internal components and indicating technical issues with a blinking light.
• Troubleshooting solutions for the IT light blinking include checking the temperature sensor, inspecting wiring, cleaning the grill, and updating firmware.
• Regular maintenance, including cleaning, inspection, and proper storage, can prevent issues with the grill and save time and money in the long run.
• When seeking customer support, be sure to have the model and serial number ready and clearly explain the issue and steps already taken to fix it.

Understanding the Pit Boss IT Light

You’ll want to know what the Pit Boss IT light means before you start troubleshooting, so let’s dive in. The IT light is a crucial indicator that tells you whether your Pit Boss grill is functioning correctly or not. IT stands for Internal Temperature, and it’s responsible for monitoring the temperature of the grill’s internal components.

When the Pit Boss IT light is blinking, it means that the grill is experiencing some technical issues. It may indicate that the grill’s internal temperature is too high or too low, or that there’s a problem with the grill’s control board. If the light is blinking, you’ll need to take immediate action to address the issue and prevent any further damage to the grill.

To troubleshoot the Pit Boss IT light, start by checking the grill’s internal temperature. Use a thermometer to verify the temperature and ensure that it’s set to the right level. If the temperature is too high or too low, adjust it accordingly.

If the temperature is within range, you may need to reset the grill’s control board or replace any faulty components. With a bit of patience and perseverance, you can get your Pit Boss grill back up and running in no time.

Checking the Temperature Sensor

To ensure accurate readings, it’s important to regularly check the temperature sensor. This sensor is responsible for measuring the temperature inside the grill and sending that information to the control board. A malfunctioning temperature sensor can result in inaccurate temperature readings, which can negatively affect your cooking.

To check the temperature sensor, follow these steps:

• Check the connection: Make sure the temperature sensor is properly connected to the control board. If the connection is loose, tighten it to ensure a secure fit.

• Inspect the sensor: Check the temperature sensor for any damage or wear and tear. If the sensor is damaged, it may need to be replaced.

• Clean the sensor: Over time, the temperature sensor can accumulate grease and other debris, which can affect its accuracy. Clean the sensor with a soft cloth and a mild cleaner to remove any buildup.

Regularly checking the temperature sensor can help you catch any issues early and ensure that your grill is performing at its best. By taking care of your grill and its components, you can enjoy perfectly cooked meals every time.

Inspecting the Wiring

Now it’s time to inspect the wiring. You’ll need to check for any damage that could be causing issues with your pit boss.

Look for any frayed or broken wires and replace them as needed. Don’t worry, replacing the wiring is a fairly simple process that you can easily do yourself!

How to check the wiring for damage

First, make sure the power’s turned off before you start checking the wiring for damage. This is because you don’t want to risk getting an electric shock while inspecting the wires.

Once you’ve made sure the power’s off, you can visually inspect the wiring. Look for signs of fraying, cracking, or damage to the insulation. Additionally, check for any loose connections or wires that may have come loose from their terminals.

If you notice any damage to the wiring, it’s important to replace it immediately. Don’t attempt to repair damaged wiring, as it can be dangerous and may only make the problem worse.

If you’re unsure about how to replace the wiring, it’s best to consult a professional. They’ll be able to safely replace the wiring and ensure that the pit boss grill is working properly.

Remember, checking the wiring for damage is an important part of troubleshooting any issues with your pit boss grill. So, be sure to do it regularly.

How to replace damaged wiring

If you’ve noticed any signs of damage to your wiring, it’s time to replace it to ensure your grill is functioning safely and efficiently. The first step is to turn off the power to the grill and unplug it from the outlet. Next, identify the damaged wiring by examining each wire for fraying, cracks, or breaks. If you notice any damage, you’ll need to replace the entire wire to avoid any potential safety hazards.

To replace the damaged wiring, you’ll need to gather a few tools and supplies. The table below outlines the materials you’ll need, as well as the steps to follow to replace the damaged wire. Remember to always use caution when working with electrical wiring to avoid any injuries or accidents.

Materials Needed	Steps to Follow
Wire strippers	1. Turn off power to the grill and unplug from outlet.
Electrical tape	2. Identify the damaged wiring by examining each wire for fraying, cracks, or breaks.
Wire cutters	3. Cut the damaged wire using wire cutters.
Replacement wire	4. Strip the insulation from both ends of the replacement wire using wire strippers.
Screwdriver	5. Connect the replacement wire to the appropriate terminals using a screwdriver.

Cleaning the Grill

When it comes to maintaining your grill, cleaning is key. Over time, buildup can affect the temperature sensor, causing inaccurate readings and potentially ruining your food. To prevent this, it’s important to regularly clean your grill.

In this section, we’ll discuss the steps you need to take to keep your grill in top condition.

How buildup can affect the temperature sensor

The buildup of grease and debris can really mess with the temperature sensor, causing the pit boss light to blink erratically. This can be frustrating, especially if you’re in the middle of cooking a delicious meal. The temperature sensor is responsible for accurately gauging the internal temperature of your grill, so it’s important to keep it clean and free from any buildup.

To prevent buildup from affecting your temperature sensor, it’s important to clean your grill regularly. This means removing any excess grease or debris from the grill grates, as well as wiping down the inside of your grill. Additionally, you may want to invest in a grill brush or scraper to help remove any stubborn buildup. By keeping your grill clean, you can ensure that your temperature sensor is functioning properly and avoid any issues with your pit boss light.

Problem	Cause	Solution
Blinking Pit Boss Light	Buildup on temperature sensor	Clean temperature sensor
Inaccurate temperature readings	Buildup on grill grates	Clean grill grates
Uneven cooking	Uneven heat distribution	Check for obstructions in burners		Uneven cooking	Uneven heat distribution	Check for obstructions in burners and adjust burner tubes if necessary

Steps to clean the grill

Keeping your grill clean is essential to ensuring accurate temperature readings and even cooking, so let’s take a look at the steps to clean your grill.

First, make sure your grill is turned off and completely cooled down before you begin cleaning. Remove any excess debris from the grates using a grill brush or scraper, being careful not to scratch or damage the grates.

Next, remove the grates and soak them in warm, soapy water for about 10-15 minutes. While the grates are soaking, use a damp cloth or sponge to wipe down the inside of the grill, including the lid, walls, and bottom. For tough stains or buildup, you can use a grill cleaner or degreaser, but make sure to follow the manufacturer’s instructions and rinse thoroughly.

Once the grates are done soaking, scrub them with a brush or sponge to remove any remaining debris or grease. Rinse the grates and dry them thoroughly before placing them back on the grill.

By following these steps, you can help ensure that your grill is clean and ready to use for your next BBQ.

Updating the Firmware

To update your pit boss firmware, you’ll need to follow a few simple steps. First, check the manufacturer’s website for the latest firmware version available for your grill model. Once you’ve found the correct version, download it to your computer and save it to a USB flash drive.

Next, insert the USB drive into the USB port on the back of your pit boss control panel. Turn on the grill and wait for the control panel to recognize the USB drive. From the main menu, navigate to the settings option and select ‘update firmware.’ Follow the on-screen instructions to complete the update process.

Updating your pit boss firmware is an important step in keeping your grill running smoothly. It can improve performance, fix bugs, and add new features to your grill. By following these simple steps, you can easily update your firmware and ensure that your grill is always up to date. So, take the time to update your firmware today and enjoy the benefits of a well-maintained pit boss grill.

Contacting Customer Support

If you’re experiencing issues with your pit boss grill and the light is blinking, don’t panic. The first thing you should do is check the troubleshooting guide in your manual or online. If you’ve already tried all the solutions and the issue persists, then it’s time to contact customer support.

They have a team of experts who can help you troubleshoot your grill and find the best solution to fix the problem. To contact customer support, you can either call them or send an email. Make sure you have your grill’s model number and serial number ready, as they may ask you for it.

When you reach out to customer support, be clear about the issue you’re experiencing and the steps you’ve already taken to try and fix it. They may ask you to try a few additional steps to troubleshoot the issue, or they may recommend that you send your grill in for repair. In summary, if you’re experiencing issues with your pit boss grill and the light is blinking, don’t hesitate to contact customer support for assistance.

They have a team of experts who can help you troubleshoot the issue and find a solution. Just make sure you have your grill’s model number and serial number ready, and be clear about the issue you’re experiencing and the steps you’ve already taken to try and fix it.

Preventative Maintenance

Now that you’ve contacted customer support and have hopefully resolved the issue with your pit boss pellet grill’s blinking light, it’s important to consider preventative maintenance to avoid future problems. Regular maintenance will not only keep your grill running smoothly, but it can also extend its lifespan.

One important aspect of preventative maintenance is cleaning. Make sure to clean your grill after every use, including the grates, the grease tray, and the hopper. This will prevent build-up and ensure that your grill is ready to go for your next cookout. Additionally, it’s important to inspect your grill regularly for any signs of wear and tear, such as loose screws or damaged parts.

Another important aspect of preventative maintenance is proper storage. Make sure to cover your grill when it’s not in use to protect it from the elements. If you’re storing your grill for an extended period of time, it’s a good idea to clean it thoroughly and to remove the pellets from the hopper to prevent moisture from building up and causing damage.

Preventative Maintenance Tips	Benefits
Clean your grill after every use	Prevents build-up
Inspect your grill regularly	Keeps grill running smoothly
Cover your grill when not in use	Protects from the elements
Remove pellets from hopper when storing	Prevents moisture damage

By implementing these preventative maintenance tips, you can help ensure that your pit boss pellet grill is always ready to go when you are. Plus, regular maintenance can save you time and money in the long run by preventing costly repairs or replacements. So, make sure to take care of your grill and it will take care of you.

Conclusion

In conclusion, troubleshooting the Pit Boss IT light blinking issue is essential to ensure your grill is functioning correctly. By understanding the possible causes, you can quickly identify and fix the problem, saving you time and money.

Remember to check the temperature sensor and wiring, clean the grill, update the firmware, and contact customer support if necessary. Additionally, performing preventative maintenance on your grill can help prevent future issues.

Regularly cleaning the grill, checking the wiring, and replacing worn-out parts can help ensure your Pit Boss grill lasts for years to come. With these troubleshooting tips and maintenance practices, you can enjoy delicious, perfectly grilled meals without any interruptions.