How To Reset Maytag Washer After Power Outage

If you’re a Maytag washer owner, you know how much of a lifesaver it can be when it comes to doing your laundry. However, what happens when the power goes out and your washing cycle is interrupted? That’s where knowing how to reset your Maytag washer after a power outage comes in handy.

Resetting your Maytag washer after a power outage is not as difficult as it may seem. In fact, it’s a fairly simple process that can be done in just a few steps.

Whether you’re dealing with an older model or a newer one, this guide will walk you through the steps to get your washer back up and running so you can continue with your daily routine without any hiccups.

So let’s dive in!

Checking For Power

Power outages are a real pain, aren’t they? One minute you’re going about your business, the next everything goes dark. And if you’re like most people, you probably have a lot of electronic devices in your home that need to be reset after a power outage.

If you’re wondering how to reset your Maytag washer after a power outage, don’t worry – it’s not as complicated as it might seem.

The first thing you should do is check to make sure the power is back on. This might seem obvious, but it’s worth double-checking. Look at the lights in your home – are they back on?

If so, try turning on your washer to see if it works. If the power is still out, wait until it comes back on before attempting to reset your washer.

If the power is back on and your washer still isn’t working, there may be another issue that needs to be addressed. In some cases, power surges during an outage can cause damage to electronic devices like washers. If this is the case, you may need to contact a professional for assistance.

But before you do that, try unplugging your washer for a few minutes and then plugging it back in. This can sometimes help reset the machine and get it working again.

Unplugging The Washer

Once you have checked for power and confirmed that your Maytag washer is not working due to a power outage, the next step is to unplug the machine. This is an essential step before resetting the washer as it ensures that there are no electrical surges when you plug it back in.

To unplug your Maytag washer, locate the power cord at the back of the machine and pull it out of the wall socket. Make sure to wait for at least two minutes before plugging it back in. This will allow time for any residual electricity in the machine to dissipate.

After waiting for two minutes, plug your Maytag washer back into the wall socket. You can now proceed with resetting the machine by following these steps:

  • Press the ‘Power/Cancel’ button on your Maytag washer’s control panel.
  • Wait for a few seconds until all lights on the control panel turn off.
  • Select a new cycle and press ‘Start.’

If your Maytag washer still does not turn on or operate correctly after resetting, contact a professional technician for assistance.

Remember that resetting your Maytag washer should be a last resort after checking other possible causes of malfunctioning. If you are uncertain about what to do or need further assistance, refer to your user manual or contact customer service.

Waiting For A Minute

Imagine you have just experienced a power outage and your Maytag washer has stopped working. You may feel frustrated, but don’t worry – there are a few steps you can take to reset it.

Firstly, wait for a minute or two before attempting to restart the washer. This will allow it to reset itself and prevent any potential damage caused by power surges during the outage. While waiting, take some deep breaths or stretch your legs to ease any tension you may be feeling.

To ensure that the washer is fully reset, unplug it from the power source for at least 30 seconds before plugging it back in. This will allow the control board to clear any stored codes and restore proper function. Once plugged in again, turn on the washer and check if it’s working properly.

Emotion Reason Solution
Frustration Power Outage Wait for a minute before resetting
Anxiety Fear of Damage Unplug from power source
Relief Restored Function Turn on washer and check

By following these simple steps, you can easily reset your Maytag washer after a power outage. Remember to stay calm and patient throughout the process, as rushing may cause further damage to your appliance. With a little bit of time and effort, you’ll have your washer up and running again in no time!

Resetting The Control Panel

After waiting for a minute, if your Maytag washer still doesn’t turn on after a power outage, you may need to reset the control panel. This is a simple process that can be done in just a few steps.

First, unplug the washer from the electrical outlet and wait for 1 to 2 minutes.

Then, plug it back in and press the Power button to turn it on. If this doesn’t work, try pressing and holding the Start button for at least 5 seconds.

This should reset the control panel and allow you to use your washer again. If none of these steps work, there may be an underlying issue with your washer that requires professional assistance.

In this case, contact a Maytag technician for further help. It’s always better to get expert advice rather than trying to fix things yourself and potentially causing more damage.

Restarting The Washer

You’ve just had a power outage and now it’s time to get your Maytag washer back up and running. Don’t worry, we’ve got you covered.

Here’s how to restart your washer after a power outage.

First, make sure the power is back on and that there are no other issues with your household electricity.

Next, locate the power button on your washer and press it to turn the machine off.

Wait for 30 seconds before turning it back on again. This will give the machine enough time to reset.

Once you’ve turned the washer back on, select the cycle you want to run and proceed as usual.

You may need to adjust some settings depending on your specific model. But that’s it!

Your Maytag washer should be up and running again in no time.

Troubleshooting Common Issues

If you’re experiencing issues with your Maytag washer after a power outage, you’re not alone. Fortunately, there are some simple steps you can take to reset it and get it back up and running.

Here’s what you need to do.

First, unplug the washer from the electrical outlet for at least one minute. This will allow the washer to reset itself and clear any error codes that may have been triggered by the power outage. After one minute has passed, plug the washer back in and turn it on.

If your Maytag washer still isn’t working properly after resetting it, there may be another issue at play. Check to make sure that all of the connections are secure and that there are no visible signs of damage or wear on any of the parts.

If you’re still having trouble, consider contacting a professional for assistance. With a little troubleshooting, however, you should be able to get your Maytag washer back in working order after a power outage.

Contacting Maytag Support If Necessary

If you have tried resetting your Maytag washer after a power outage and still cannot get it to work properly, it may be time to reach out for additional support. Maytag offers several resources for customers who need assistance with their products.

One option is to visit the Maytag website and browse the frequently asked questions section. Here, you may find answers to some of your most pressing questions about your washer’s reset process or other issues that may arise.

If browsing the website does not provide a solution, you can also reach out to Maytag customer service directly. The company offers phone and email support, as well as live chat options for those who prefer an immediate response.

Additional resources for troubleshooting:

  • Consult the owner’s manual for detailed instructions on how to reset your specific model of Maytag washer.

  • Check for any error codes displayed on the machine’s control panel and refer to the manual for guidance on what they mean.

  • Verify that the power outlet is working properly by testing it with another electronic device.

  • Consider scheduling a repair appointment with a certified Maytag technician if all else fails.


So, now you know how to reset your Maytag washer after a power outage. It’s not as difficult as it may seem at first, and with just a few steps, you can have your washer up and running again in no time.

Don’t let a power outage ruin your laundry day again! With this simple guide, you can easily reset your Maytag washer and get back to doing what you need to do.

It’s so easy, even a baby could do it (okay, maybe not really, but it’s pretty simple)! So go ahead and give it a try the next time you experience a power outage – you’ll be glad you did!