How Do You Glue Trex Decking Together?

Trex decking is a popular material for people who want to build a Noah’s Ark or Tuscan inspired patio. But if you’re like most people, you’re not sure where to find the right adhesive to glue it all together.

In this guide, we will go over the different types of adhesives that are available and how to use them so you can successfully attach Trex decking. We also have a video below that illustrates the process in more detail.

Trex Decking Adhesive

If you’re looking to glue Trex decking together, you’ll need to use a special adhesive.

Here’s a step-by-step guide on how to do it, so you can get your decking project done quickly and easily.

The first step is to clean both surfaces that you’ll be bonding together. Use a cleaner that is designed for Trex decking, or a mild soap and water solution. Once the surfaces are clean, you’ll want to roughen them up a bit so that the adhesive will have something to grip onto. You can do this with sandpaper or a wire brush.

Next, apply the adhesive to one of the surfaces using a caulk gun. Spread it evenly over the surface, making sure to get into all of the nooks and crannies. Then, take the other piece of decking and press it firmly into place. Use clamps or weights to hold it in place while the adhesive dries.

Depending on the type of adhesive you’re using, this could take anywhere from 24 hours to a week.

Once the adhesive has completely dried, your Trex decking will be firmly bonded together and ready for use!

How To Glue Trex Decking Together

If you’re looking to glue Trex decking together, you’ll need to use a special adhesive. Here’s a step-by-step guide on how to do it, so you can get your decking project done quickly and easily.

  1. Begin by sanding down the boards that you’ll be gluing together. This will help create a smooth surface for the adhesive to bond to.
  2. Next, apply the adhesive to one of the boards using a caulk gun. Make sure to evenly distribute the adhesive across the entire board.
  3. Take the second board and align it with the first one. Apply pressure to the board so that the two pieces are flush against each other.
  4. Once the adhesive has dried, you can then start screwing the boards together. Be sure to countersink the screws so that they’re flush with the surface of the wood.

Step by step Guide On How To Use Trex Decking Adhesive

Trex decking adhesive is a special type of glue that is specifically designed for use with Trex decking material. This adhesive is necessary in order to ensure that the Trex decking boards are properly secured to one another and will not come apart over time. Here is a step-by-step guide on how to use Trex decking adhesive so that you can get your decking project done quickly and easily.

The first step is to clean the surface of the Trex decking boards that you will be glueing together. Use a damp cloth or sponge to remove any dirt, dust, or debris from the surface of the boards. Once the surface is clean, you can then proceed to the next step.

The next step is to apply the Trex decking adhesive to the surface of the boards. You will need to use a putty knife or other similar tool to spread the adhesive evenly over the surface of the boards. Make sure that you apply enough adhesive so that it is visible on the surface of the boards but not so much that it is dripping off.

Once you have applied the adhesive, you can then begin to place the boards together. Start at one end and work your way towards the other, making sure that each board is properly aligned with the one next to it. Once all of the boards are in place, you can then use clamps or weights to hold them together until the adhesive dries.

Allow the adhesive to dry for at least 24 hours before removing any clamps or weights. Once the adhesive is fully dried, your Trex deck will be securely glued together and ready for use.

What Are The Benefits Of Using Trex Decking Adhesive?

There are many benefits of using Trex decking adhesive, including:

  • Trex decking adhesive is designed specifically for use with Trex decking, so you can be sure it will provide a strong and durable bond.
  • Trex decking adhesive is easy to use and apply, so you can get your decking project done quickly and easily.
  • Trex decking adhesive is weather resistant, so you don’t have to worry about it coming undone in the rain or snow.

If you’re looking to glue Trex decking together, then Trex decking adhesive is the best option for you. It’s strong, easy to use, and weather resistant, so you can be confident your deck will stay together no matter what the weather throws at it.

How Long Does It Take For The Adhesive To Dry?

It takes about 24 hours for the adhesive to dry. You should allow the adhesive to dry for at least 12 hours before you start using the decking.

Conclusion

With this step-by-step guide, you now know how to use Trex decking adhesive to glue your decking together. This adhesive is specially made for Trex decking, so you can be sure it will hold your decking together securely. It also dries quickly, so you can get on with enjoying your new deck as soon as possible. Thanks for reading!